When the weather gets colder, you stop thinking about your lawn sprinklers. But if you forget them, you could get a huge, costly surprise next spring. The simple truth is that any water left inside your sprinkler pipes, valves, and heads will turn to ice when it gets too cold. Ice breaks things.
When water freezes, it pushes out with a lot of power. This power breaks the plastic pipes and small parts of your sprinkler system. Pipes can crack open, joints can split, and the small control parts can break. Fixing these broken parts in the spring will always cost more than paying to do the winterizing sprinkler system now. The whole point is to get all the water out so nothing is left to freeze and break your system. This is a must-do step to keep your yard safe.
Safely Remove Every Drop to Protect Sprinkler Lines
You can try a few ways to get water out, but in places with cold winters, the blowing out sprinkler system method is the only one that works for sure. This means using a big air machine to push all the water out of the pipes, one area at a time. The strong air pushes the last of the water out through the sprinkler heads until you only see mist. This makes sure the lines are fully empty. This job needs special tools and people who know how to use them. That is why you should call MW Lawn & Landscape for a pro blowing out sprinkler system service.
To do the blowing out sprinkler system job right, you need to follow these steps with the correct tools:
A Professional Air Compressor Must Be Used
Your small garage air tank is not strong enough to clear a full system. Pros use large air machines that move a lot of air safely.
Air Pressure Is Monitored Closely
Too much pressure can burst pipes and ruin sprinkler heads. Experts maintain the safe pressure for all pipes.
Turn Off Main Water Supply
Before using air, the main water line must be shut off to prevent new water from entering the system.
Handle Backflow Components Carefully
The backflow device prevents dirty water from entering your clean water and must be emptied and shut down safely.
Clear Each Zone Separately and Quickly
Technicians run air through one zone at a time to prevent overheating and damage to the plastic parts.
Shut Down Sprinkler Timers Properly
Automatic control boxes must be turned off or set to “rain mode” to stop accidental operation.
DIY Risks vs Professional Winterizing Services: Protect Your Investment
Some homeowners try to do the blowing out sprinkler system themselves to save money. But this job has serious risks. Using too much pressure or leaving air on too long can damage the system. Missing a low spot in a pipe means water will freeze and cause breaks. Hiring MW Lawn & Landscape ensures the work is done safely and correctly. Repairing this damage will cost much more than hiring a pro for winterizing the sprinkler system.
Here are the top reasons to hire MW Lawn & Landscape:
Professionals Have Proper Tools
Big air machines give correct air pressure safely and thoroughly.
Small Problems Are Identified Early:
Technicians find leaks, weak heads, and minor issues before spring.
Warranty Stays Valid
Many systems require a licensed worker to maintain warranty coverage.
Save Time and Avoid Stress
A professional job is done correctly the first time for peace of mind.
Conclusion
Do not wait until the last minute to winterize your sprinkler system. Ice can damage pipes, valves, and sprinkler heads, causing costly repairs. Using the professional blowing out sprinkler system method from MW Lawn & Landscape ensures every line and zone is cleared safely. This service protects your system, prevents damage, and keeps your lawn healthy for spring. Trusting skilled technicians guarantees peace of mind and a fully functional system when warmer weather returns. Contact MW Lawn & Landscape today to schedule your professional sprinkler blowout before the first freeze.